1. Turn the light on and off at the power switch 3 times in quick succession. The light will start to blink rapidly.
2. Open the Mercator Ikuü app.
3. Tap + > Add device > Lighting then select your product.
4. Confirm your Wi-Fi details, then tap ‘next’
5. When the indicator is blinking, tap ‘indicator is rapidly blinking’ then ‘next’.
6. The pairing process will start, which will add your product to the app.
7. Once pairing is complete, you can edit your product’s name [optional].
8. To finish the pairing process, tap ‘done’.

Product still not paired?

The indicator light should stop flashing during the pairing process above. If it does, but the product doesn’t pair, try pairing with AP mode as per the instructions below. If the indicator light doesn’t stop flashing during the pairing process, contact our customer service team directly via phone on 1300 552 255 (AU) or via email at customercare@mercator.com.au

1. Connect your globe to a lamp holder and switch the power on.
2. Turn the globe on and off at the power switch 3 times in quick succession. The globe will start to blink rapidly.
3. Turn the globe on and off 3 times in quick succession. The globe will start to blink slowly.
4. Open the Mercator Ikuü app.
5. Tap + > Add Device > Lighting, then select your product
6. Enter your Wi-Fi details then tap ‘next’
7. Tap > EZ Mode > AP Mode.
8. Tap ‘indicator is blinking slowly’ then ‘next’.
9. Tap ‘Go to Connect’
10. Connect your phone to the hotspot that appears “IKUU-XXXX’. This is in the Wi-Fi settings of your phone.
11. Return to the Mercator Ikuü app to finish the pairing process.
12. Once pairing is complete, you can edit your product’s name (optional).
13. To finish the pairing process, tap ‘done’.

If you are still not able to pair please click here for more Wi-Fi troubleshooting or contact our customer service team